Hengstler Absolute Rotary Encoders
PROFIBUS
Hengstler Absolute shaft encoders comprise a series known as ACURO. All are CE marked, RoHS compliant and UL approved. Hengstler PROFIBUS absolute encoders are available in one body size (58mm diameter) and with a wide selection of options. Choose from solid or hollow (hub) shaft; synchro, clamping or square flange, and IP64 or IP67 protection class. Suitable for single turn or multiturn with varying resolutions. You will need to specify the resolution required when ordering and whether you need single turn (ST) or multiturn (MT). The options are clearly shown in the datasheets which you can download here. Can also be used to output speed and acceleration.
3 LED's show power, error and bus status. Detail is shown in the "manual" i.e installation instructions.
Maximum baud rate 12MBaud (depending on PROFIBUS network). Standard version (part number suffix 'R') fitted with 3 M12 connectors (Bus In, Bus Out and Power) for standard PROFIBUS architecture. You can download the GSD file here (needed to parameterise in PROFIBUS networks). Please note that the predecessor to the AC58 PROFIBUS encoder was the Hengstler RA58.
| Description | File | Size |
|---|---|---|
| AC58 PROFIBUS - Details | 132Kb | |
| AC58 PROFIBUS - Network Parameters | GSD | 6Kb |
| AC58 PROFIBUS - Manual | 5 - 1024 | |
| AC58 PROFIBUS - Dimensional Drawings | 731Kb |
Hengstler AC58 PROFIBUS
Hollow Shaft - 10 & 12mm diameter
Single Turn - 12 Bit
Multiturn - Up to 26 Bit
10 - 30VDC
Max 10,000 rpm continuous IP64/67
Hengstler AC58 PROFIBUS
Solid Shaft - 6 & 12mm diameter
Single Turn - 10 - 14 Bit
Multiturn - 12 Bit
10 - 30VDC
Max 10,000 rpm continuous IP64/67
 |
© 2010 H. Kuhnke Ltd | Contact | +44 (0)1794 514445 Web Development - Orionesque Ltd Registered in the UK - No. 665193 - VAT No. GB207766451 |
 |